EN Product Safety Information Intended Use: These Air Grinders are designed for material removal or cutting off using a rotated abrasive wheel, in accordance with the product specification table. For additional information refer to Air Grinder Product Safety Information Manual Form 04584959. Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications Models
Free Speed
Arbor Size
rpm
Wheel Maximum Wheel Wheel Diameter Thickness Type in. (mm) in. (mm)
Manuals can be downloaded from www.ingersollrandproducts.com. Product Specifications. Sound Level dB (A). Vibration. Free Speed. Model(s). Collet Size.
*K. 3.5. 4.2. 83.0. 4.5. 42 . 82.0. 4.5. Product Safety Information. Intended Use: These die grinders are designed for grinding, porting, polishing, de-burring, and ...
Air Fuse upstream of hose and use an anti-whip device across any hose coupling ... When the life of the tool has expired, it is recommended that the tool be ...
Intended Use: These Air Drills are designed for drilling, honing, reaming and hole sawing. For additional information refer to Product Safety Information Manual ...
slijpsteen of elk ander hulpstuk grondig worden gecontroleerd. ... moet de regelhendel worden losgelaten en de kleine slijpsteen, slijpschijf of elk ander hulpstuk.
i OOO. ---. ---. I valori relativi a suoni e vibrazioni sono stati misurati in conformità agli standard di test riconosciuti a livello internazionale. L'esposizione all'utente ...
1 ago. 2006 - For additional information refer to Air Pulse Tools Product Safety ... from valve(s) at low point(s) of piping, air filter and compressor tank daily.
1 ago. 2006 - ... should only be carried out by an authorized Service Center. Refer all communications to the nearest Ingersoll Rand Office or Distributor.
dles or a tool steel that is retained and driven by the Scaler. ... Always turn off the air supply, bleed the air pressure and disconnect the air supply hose when not ...
e(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across.
48h. 11. 48h. PMAX. 7. 0. 24h. N u. 9. 8h. (Dwg. 47132600). 1 2 3. 10. IR # - NPT .... circular arrow and defined as h=hours, d=days, and m=months of actual use.
For additional information refer to Air Die Grinder Product Safety Information Manual. Form 04580288. Manuals ..... + Druk (L) #Vermogen (L.) niveau. 87,1. 98.1.
Inhalation of this dust and/or inhalation of vapor released from the heating of PTFE dust may cause irritation to the respiratory system. • Do not use compressed ...
For additional information refer to Product Safety Information Manual Form .... Ces perceuses pneumatiques sont conçues pour les opérations de perçage, ...
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an ...
... lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel. ... tools when tired, or under the influence of medication, drugs, or alcohol.
It is your responsibility to make this safety information available to others that will ... use an anti-whip device across any hose coupling without internal shut-off, to.
Air under pressure can cause severe injury. Never direct air at yourself or anyone else. Always turn off the air supply, bleed the air pressure and disconnect the ...
Tools are coated inside and out with rust-resisting oil before leaving the factory. .... Tool repair and maintenance should only be carried out by an authorized ...
Dry the tool immediately after cleaning, pour 3 cm of Ingersoll Rand. No. 10 Oil into the air inlet and again operate the tool for 5 seconds to lubricate all working ...
Therefore, on site measurements should be used to determine the hazard level in that specific application. Installation and Lubrication. Size air supply line to ...
Course du. Piston. Niveau sonore dB (A). (ISO15744) .... Saisissez la partie de devant par la main et insérez une tige qui passera à travers la valve et entrera en ...
