iPad 4 Wi-Fi Headphone Jack Cable Replacement

Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly ... adhesive securing it to the rear aluminum frame.
783KB Größe 0 Downloads 0 vistas
iPad 4 Wi-Fi Headphone Jack Cable Replacement

iPad 4 Wi-Fi Headphone Jack Cable Replacement Internal prereq.

Escrito por: Walter Galan

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 4

iPad 4 Wi-Fi Headphone Jack Cable Replacement

INTRODUCCIÓN Internal prereq.

HERRAMIENTAS: Tweezers (1) Spudger (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 4

iPad 4 Wi-Fi Headphone Jack Cable Replacement

Paso 1 — Headphone Jack Cable



Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.



Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Paso 2



Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.



Pull the headphone jack assembly cable straight out of its socket on the logic board.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 4

iPad 4 Wi-Fi Headphone Jack Cable Replacement

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2018-09-08 04:13:02 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 4